What types of lighting control systems are available?

Lighting control systems fall into four main categories: hardware consoles (dedicated desks with faders and buttons, ideal for live operation), software interfaces (PC or tablet-based control via USB or Ethernet, offering powerful programming at lower cost), preset controllers (simple scene-trigger devices for fixed installations) and architectural systems (DALI, KNX for building integration, focusing on energy efficiency rather than dynamic effects). For stage and event use, DMX-based hardware consoles and software systems dominate, while architectural applications favour DALI and wireless protocols like Zigbee or Casambi.

How can I control lights via smartphone?

Smartphone control requires a wireless DMX interface or a lighting controller with built-in Wi-Fi or Bluetooth. Apps like Luminair (iOS), DMXControl (Android) or manufacturer-specific apps (e.g. Cameo Control, Showtec QuickDMX) connect to the interface over your local network, allowing you to adjust colours, trigger cues and mix scenes via touchscreen gestures. For permanent installations, systems like Casambi embed Bluetooth modules directly into LED drivers, eliminating the need for separate DMX cabling. Smartphone control is ideal for small venues, mobile DJs and installations where a full console would be impractical.

What is DMX-512 and how does it work?

DMX-512 (Digital Multiplex with 512 channels) is the standard protocol for stage lighting control, defined by ANSI E1.11. The system transmits digital control data at 250 kbit/s over a daisy-chained cable network, with each fixture assigned a unique start address (1–512). The controller sends a continuous stream of packets containing 512 channel values (0–255), updated roughly 44 times per second. Each fixture reads the packet, extracts the values for its assigned channels, and adjusts its output accordingly. A single DMX universe supports up to 32 fixtures; larger installations use multiple universes via splitters or network protocols like Art-Net.

What's the difference between 3-pin and 5-pin DMX cables?

The official DMX-512 standard specifies a 5-pin XLR connector (pins 1: ground, 2: data–, 3: data+, 4 and 5: reserved), but many manufacturers use 3-pin XLR (the same as audio cables) for cost and convenience. The 3-pin version omits the unused pins 4 and 5, which are rarely implemented in practice. While 3-pin DMX works reliably for most installations, it's technically non-compliant and can cause compatibility issues with certain fixtures. Critically, never substitute standard microphone cables for DMX – they have the wrong impedance (50–75Ω vs. 110Ω required) and will cause signal reflections over long runs.

What does a lighting control system cost?

Entry-level USB-DMX interfaces for PC-based control start at €80–€150, offering a single DMX universe (512 channels). Compact hardware controllers with 6–12 faders range from €150 to €600, suitable for mobile DJs and small venues. Mid-range scene-based consoles with touchscreens and multiple universes cost €800–€2,500, ideal for clubs and theatres. Professional touring consoles from brands like Chamsys, Avolites and MA Lighting range from €3,000 to over €50,000, offering advanced programming, redundant systems and integration with timecode and video. Software packages vary from free (QLC+) to €500+ for professional licences (Daslight, Sunlite).

Which lighting control system suits my venue?

For mobile DJs and small events, a compact USB-DMX interface (€80–€200) paired with free or low-cost software provides flexible control without the bulk of a hardware console. Clubs and fixed installations benefit from scene-based controllers (€300–€1,500) with faders assigned to lighting looks, enabling live mixing without complex programming. Theatres and concert venues require consoles with cue-list playback, timecode sync and multiple universes (€1,500–€10,000+), from brands like Chamsys or ETC. Touring productions demand ruggedised, redundant systems (€5,000+) with offline programming and backup controllers. For architectural integration, DALI or KNX systems offer energy management and building automation.

How many fixtures can one DMX universe control?

A single DMX universe provides 512 channels of control data. The number of fixtures you can connect depends on how many channels each fixture uses. A simple RGB LED PAR can uses 3 channels (red, green, blue), allowing up to 170 fixtures per universe. A moving head spot might use 16–24 channels (pan, tilt, colour, gobo, dimmer, strobe, etc.), limiting you to 20–30 fixtures per universe. The DMX-512 standard officially supports up to 32 devices per universe, though many systems push this to 40–50 in practice. For larger installations, use multiple universes via DMX splitters or network protocols like Art-Net.

Do I need a DMX terminator plug?

Yes – a 120Ω terminator plug should always be installed in the DMX output socket of the last fixture in your chain. Without termination, the DMX signal reflects back along the cable, causing interference, flickering and erratic behaviour, especially over long cable runs (>50 metres). The terminator is a simple XLR plug with a 120Ω resistor soldered between pins 2 and 3. Many professional fixtures include a built-in termination switch, eliminating the need for an external plug. Termination is critical for reliable operation and is considered standard practice in professional installations.

Light controllers

DIN-Schienen-Gehäuse IP67 Außenschutz für auf DIN-Schienen montierte LumenRadio-Produkte

DIN Rail IP67 Enclosure Outdoor protection for DIN rail mounted LumenRadio products

IP67 and UL 746C for outdoor use • 6 module wide DIN rail • RP-SMA male to N female antenna connector • Cable glands and moisture vent • The LumenRadio DIN Rail IP67 Enclosure...

€179.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

LUMENRADIO MoonLite² CRMX transceiver

For instant wireless capability • Male and female 5-pin XLR connectors • Screen and navigation buttons • Rechargeable battery • Bluetooth connectivity • Lumenradio's...

€689.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XPD-28-5R (rack), RDM-DMX splitter

Flexible signal distribution The XPD-28 splitters distribute the DMX signals from two inputs, amplified and processed, to eight outputs. This allows the 32-device limit of the DMX standard to be...

€1,425.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XPD-28-3R (rack), RDM-DMX splitter

Flexible signal distribution The XPD-28 splitters distribute the DMX signals from two inputs, amplified and processed, to eight outputs. This allows the 32-device limit of the DMX standard to be...

€1,425.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XPD-28-8R (rack), RDM-DMX splitter

Flexible signal distribution The XPD-28 splitters distribute the DMX signals from two inputs, amplified and processed, to eight outputs. This allows the 32-device limit of the DMX standard to be...

€1,544.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XPD-28-5R8 (rack), RDM-DMX splitter

Flexible signal distribution The XPD-28 splitters distribute the DMX signals from two inputs, amplified and processed, to eight outputs. This allows the 32-device limit of the DMX standard to be...

€1,544.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XPD-28-5R2 (rack), RDM-DMX splitter

Flexible signal distribution The XPD-28 splitters distribute the DMX signals from two inputs, amplified and processed, to eight outputs. This allows the 32-device limit of the DMX standard to be...

€1,544.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XPD-28-5R4 (rack), RDM-DMX splitter

Flexible signal distribution The XPD-28 splitters distribute the DMX signals from two inputs, amplified and processed, to eight outputs. This allows the 32-device limit of the DMX standard to be...

€1,544.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XPD-28-5R6 (rack), RDM-DMX splitter

Flexible signal distribution The XPD-28 splitters distribute the DMX signals from two inputs, amplified and processed, to eight outputs. This allows the 32-device limit of the DMX standard to be...

€1,544.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XES-8G Gigabit Ethernet Switch

Gigabit Ethernet switch With its ease of use, the XES-8G is ideal for small to medium-sized productions with high demands. As TCP/IP and Ethernet-based protocols become increasingly prevalent in...

€1,068.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XES-2T6 2+6 Gigabit Switch

Simple, Secure, Fast → Swisson XES-2T6 The XES-2T6 is a Gigabit Ethernet switch with six plus two ports. Two of these ports are bundled, allowing a connection with redundancy and increased...

€1,187.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XND-8R3 Ethernet Node (Rack)

Art-Net to DMX converter The XND-4 and XND-8 nodes are user-friendly converters from Art-Net and sACN to DMX, enabling the distribution of up to 8 DMX universes via individually isolated DMX...

€1,544.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XND-8R5 Ethernet Node (Rack)

Art-Net to DMX converter The XND-4 and XND-8 nodes are user-friendly converters from Art-Net and sACN to DMX, enabling the distribution of up to 8 DMX universes via individually isolated DMX...

€1,544.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XND-8R8 Ethernet Node (Rack)

Art-Net to DMX converter The XND-4 and XND-8 nodes are user-friendly converters from Art-Net and sACN to DMX, enabling the distribution of up to 8 DMX universes via individually isolated DMX...

€1,663.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XND-4B3 Ethernet Node (Box)

Art-Net to DMX converter The XND-4 and XND-8 nodes are user-friendly converters from Art-Net and sACN to DMX, enabling the distribution of up to 8 DMX universes via individually isolated DMX...

€949.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XND-4B5 Ethernet Node (Box)

Art-Net to DMX converter The XND-4 and XND-8 nodes are user-friendly converters from Art-Net and sACN to DMX, enabling the distribution of up to 8 DMX universes via individually isolated DMX...

€949.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XND-4B8 Ethernet Node (Box)

Art-Net to DMX converter The XND-4 and XND-8 nodes are user-friendly converters from Art-Net and sACN to DMX, enabling the distribution of up to 8 DMX universes via individually isolated DMX...

€1,009.12 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XND-4R3 Ethernet Node (Rack)

Art-Net to DMX converter The XND-4 and XND-8 nodes are user-friendly converters from Art-Net and sACN to DMX, enabling the distribution of up to 8 DMX universes via individually isolated DMX...

€1,068.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XND-4R5 Ethernet Node (Rack)

Art-Net to DMX converter The XND-4 and XND-8 nodes are user-friendly converters from Art-Net and sACN to DMX, enabling the distribution of up to 8 DMX universes via individually isolated DMX...

€1,068.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XND-4R8 Ethernet Node (Rack)

Art-Net to DMX converter The XND-4 and XND-8 nodes are user-friendly converters from Art-Net and sACN to DMX, enabling the distribution of up to 8 DMX universes via individually isolated DMX...

€1,128.12 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson ISP-4R-Term Hutschienen Splitter

Swisson ISP-4R-Term DIN rail splitter

Installation splitter The DMX splitters of the ISP-4 and ISP-6 lines amplify an incoming DMX signal and make it available on 4 or 6 outputs. This allows the 32-device limit of the DMX standard to...

€414.12 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available;
Article is coming soon

Currently not available

Swisson XWL-T-CRMX-3 Transmitter

LumenRadio Transmitter The XWL series stands for compact wireless DMX transmitters and wireless DMX receivers. All devices are available as W-DMX or CRMX-compatible versions. W-DMX from Wireless...

€711.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XWL-T-CRMX-5 Transmitter

LumenRadio Transmitter The XWL series stands for compact wireless DMX transmitters and wireless DMX receivers. All devices are available as W-DMX or CRMX-compatible versions. W-DMX from Wireless...

€711.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XWL-R-CRMX-3 Receiver

LumenRadio Receiver The XWL series stands for compact wireless DMX transmitters and wireless DMX receivers. All devices are available as W-DMX or CRMX-compatible versions. W-DMX from Wireless...

€652.12 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available